<listing id="95xdb"><dfn id="95xdb"></dfn></listing>
<pre id="95xdb"></pre>
<strike id="95xdb"></strike>

    <menuitem id="95xdb"><sub id="95xdb"></sub></menuitem>

      <menuitem id="95xdb"><dfn id="95xdb"></dfn></menuitem>

        <listing id="95xdb"><sub id="95xdb"></sub></listing>

        News

        Current Position: Home > News
        Maintenance guide for gas mold temperature machine
        announcer:

        Gas mold temperature maintenance guide

         

        As a commonly used temperature control device, the mold temperature machine can reduce the preheating time of the mold, improve the surface quality of the product and can be completely automated. In order to extend the service life of the mold temperature machine to a maximum, daily protection and maintenance are essential.

         

        So, what are the daily maintenance of mold temperature machine?

        1) Before the initial use, check the dosage and circulation of cooling water, adhere to the surrounding environmental hygiene, and reduce cleaning;

        2) According to the preface, choose the proper maintenance method. The water temperature machine is water about the preface, ensuring that the high-quality water quality can prevent clogging and not easy to accumulate scale. The preface of the oil temperature machine is oil, try to change it once a month or two to avoid the unit temperature not increasing;

        3) Check regularly whether the oil-type mold temperature machine/water-type mold temperature oil pump and water pump have oil leakage and water leakage. If necessary, the pump shaft seal can also be replaced regularly.

        4) The electrical components can be replaced in time according to the service life of the components, and tested regularly to ensure safety; generally, the need for high temperatures above 200°C needs to be replaced every 5 months.

        5) In terms of piping, it is necessary to determine whether the piping is blocked according to the connection between the pump and the pressure. If the pressure is too low, the heating pipe can be taken out and sorted out, especially the filter net cover imported by the system. Try to clean it once a month.

        Recommend